Crompton Lower
Key Takeaway
Crompton Lower is classified as low hazard in Rhode Island. It was completed in 1885 and is 141 years old. Its primary use is other.
Physical Details
| Dam Height | 8 ft (taller than 13.5% in RI) |
| Dam Length | 350 ft |
| Max Storage | 182 acre-ft |
| Normal Storage | 122 acre-ft |
| Surface Area | 20 acres |
| Drainage Area | 72 sq mi |
| Max Discharge | 4,090 cfs |
| Year Completed | 1885 (141 years old) |
| NID ID | RI03804 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Private
Nearby Dams
Centerville Pond
Kent, RI
High Hazard 16 ftBouchar Farm Pond
Kent, RI
Significant Hazard 7 ftQuidnick Pond Upper
Kent, RI
Low Hazard 17 ftArctic
Kent, RI
High Hazard 28 ftMill Pond
Kent, RI
Significant Hazard 19 ftTiogue Lake
Kent, RI
High Hazard 9 ftRoyal Mills
Kent, RI
High Hazard 21 ftCamp Warwick Pond
Kent, RI
High Hazard 15 ftFrequently Asked Questions
What is the hazard classification of Crompton Lower?
Crompton Lower is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Crompton Lower?
Crompton Lower is owned by information not available (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Crompton Lower built?
Crompton Lower was completed in 1885, making it 141 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Crompton Lower?
Crompton Lower serves the following purposes: Other. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Crompton Lower?
Crompton Lower has a dam height of 8 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.