Cook Pond Dam
Key Takeaway
Cook Pond Dam is classified as low hazard in Massachusetts. Its primary use is recreation.
Physical Details
| Dam Height | 15 ft (taller than 48.8% in MA) |
| Dam Length | 450 ft |
| Dam Type | Earth |
| Max Storage | 1.0K acre-ft |
| Normal Storage | 400 acre-ft |
| Surface Area | 155 acres |
| Drainage Area | 1 sq mi |
| NID ID | MA03047 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
CITY OF FALL RIVER
Local Government
Nearby Dams
Firestone Pond Dam #1
Bristol, MA
Significant Hazard 9 ftQuequechan Control Structure
Bristol, MA
High Hazard 25 ftStafford
Newport, RI
Significant Hazard 5 ftNorth Watuppa Pond Dam
Bristol, MA
High Hazard 11 ftCreamer
Newport, RI
High HazardSawdy Pond Dam
Bristol, MA
Significant Hazard 11 ftSwansea Print Works Dam
Bristol, MA
Low Hazard 15 ftSwansea Dam
Bristol, MA
Significant Hazard 13 ftFrequently Asked Questions
What is the hazard classification of Cook Pond Dam?
Cook Pond Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Cook Pond Dam?
Cook Pond Dam is owned by CITY OF FALL RIVER (Local Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
What is the primary purpose of Cook Pond Dam?
Cook Pond Dam serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Cook Pond Dam?
Cook Pond Dam has a dam height of 15 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Cook Pond Dam last inspected?
Cook Pond Dam was last inspected on May 25, 2018. Inspection dates indicate when a formal review occurred, not the results of that inspection.