Brisco
Key Takeaway
Brisco is classified as low hazard in Vermont. It was completed in 1971 and is 55 years old. Its primary use is recreation.
Physical Details
| Dam Height | 28 ft (taller than 74.4% in VT) |
| Dam Length | 600 ft |
| Dam Type | Earth |
| Max Storage | 21 acre-ft |
| Normal Storage | 0 acre-ft |
| Surface Area | 2 acres |
| Drainage Area | 0 sq mi |
| Year Completed | 1971 (55 years old) |
| NID ID | VT00339 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
LINTILHAC FAMILY TRUST
Private
Nearby Dams
Bloch
Lamoille, VT
Significant Hazard 36 ftMcallister Pond
Lamoille, VT
Significant HazardWaterbury
Washington, VT
High Hazard 187 ftMiddlesex No. 2
Washington, VT
High Hazard 51 ftKimibakw
Lamoille, VT
Low Hazard 32 ftMoretown No. 8
Washington, VT
Low Hazard 31 ftSchwartz
Lamoille, VT
Significant Hazard 18 ftBolton Falls
Washington, VT
Low Hazard 75 ftFrequently Asked Questions
What is the hazard classification of Brisco?
Brisco is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Brisco?
Brisco is owned by LINTILHAC FAMILY TRUST (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Brisco built?
Brisco was completed in 1971, making it 55 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Brisco?
Brisco serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Brisco?
Brisco has a dam height of 28 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Brisco last inspected?
Brisco was last inspected on July 17, 1986. Inspection dates indicate when a formal review occurred, not the results of that inspection.