Blockton Watershed Site S-10
Key Takeaway
Blockton Watershed Site S-10 is classified as low hazard in Iowa. It was completed in 1966 and is 60 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 25 ft (taller than 19.3% in IA) |
| Dam Length | 612 ft |
| Dam Type | Earth |
| Max Storage | 249 acre-ft |
| Normal Storage | 94 acre-ft |
| Surface Area | 14 acres |
| Drainage Area | 1 sq mi |
| Max Discharge | 0 cfs |
| Year Completed | 1966 (60 years old) |
| NID ID | IA01066 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Taylor County SWCD
Local Government
Nearby Dams
Blockton Watershed Site S-1
Taylor, IA
Low Hazard 24 ftBlockton Watershed Site W-5
Taylor, IA
Low Hazard 22 ftBlockton Watershed Site S-2
Taylor, IA
Low Hazard 27 ftBlockton Watershed Site S-9
Taylor, IA
Low Hazard 30 ftBlockton Watershed Site W-7
Taylor, IA
Low Hazard 24 ftBlockton Watershed Site V-1
Taylor, IA
Low Hazard 32 ftBlockton Watershed Site S-5
Taylor, IA
Low Hazard 41 ftBlockton Watershed Site S-7
Taylor, IA
Low Hazard 23 ftFrequently Asked Questions
What is the hazard classification of Blockton Watershed Site S-10?
Blockton Watershed Site S-10 is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Blockton Watershed Site S-10?
Blockton Watershed Site S-10 is owned by Taylor County SWCD (Local Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Blockton Watershed Site S-10 built?
Blockton Watershed Site S-10 was completed in 1966, making it 60 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Blockton Watershed Site S-10?
Blockton Watershed Site S-10 serves the following purposes: Fire Protection, Stock, Or Small Fish Pond, Flood Risk Reduction. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Blockton Watershed Site S-10?
Blockton Watershed Site S-10 has a dam height of 25 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.