Big Wyacondah Watershed Site 10
Key Takeaway
Big Wyacondah Watershed Site 10 is classified as low hazard in Iowa. It was completed in 1976 and is 50 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 26 ft (taller than 24.7% in IA) |
| Dam Length | 336 ft |
| Dam Type | Earth |
| Max Storage | 44 acre-ft |
| Normal Storage | 23 acre-ft |
| Surface Area | 3 acres |
| Drainage Area | 0 sq mi |
| Max Discharge | 0 cfs |
| Year Completed | 1976 (50 years old) |
| NID ID | IA01573 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Davis County SWCD
Local Government
Nearby Dams
Big Wyacondah Watershed Site 14a
Davis, IA
Low Hazard 24 ftBig Wyacondah Watershed Site 13
Davis, IA
Low Hazard 28 ftBig Wyacondah Watershed Site 7
Davis, IA
Low Hazard 28 ftWendt Dam
Scotland, MO
Low Hazard 27 ftBig Wyacondah Watershed Site 16
Davis, IA
Low Hazard 28 ftSargent Dam
Davis, IA
Low Hazard 24 ftBig Wyacondah Watershed Site 20
Davis, IA
Low Hazard 27 ftMunro Dam
Scotland, MO
Low Hazard 28 ftFrequently Asked Questions
What is the hazard classification of Big Wyacondah Watershed Site 10?
Big Wyacondah Watershed Site 10 is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Big Wyacondah Watershed Site 10?
Big Wyacondah Watershed Site 10 is owned by Davis County SWCD (Local Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Big Wyacondah Watershed Site 10 built?
Big Wyacondah Watershed Site 10 was completed in 1976, making it 50 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Big Wyacondah Watershed Site 10?
Big Wyacondah Watershed Site 10 serves the following purposes: Fire Protection, Stock, Or Small Fish Pond, Flood Risk Reduction. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Big Wyacondah Watershed Site 10?
Big Wyacondah Watershed Site 10 has a dam height of 26 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.