Betty Taylor Dam

Tr-Rufus Creek· Union, Louisiana· Built 1970· Earth· 18 ft tall
Low Hazard Recreation Private

Key Takeaway

Betty Taylor Dam is classified as low hazard in Louisiana. It was completed in 1970 and is 56 years old. Its primary use is recreation.

Physical Details

Dam Height 18 ft (taller than 51.1% in LA)
Dam Length740 ft
Dam TypeEarth
Max Storage126 acre-ft
Normal Storage112 acre-ft
Surface Area14 acres
Drainage Area151 sq mi
Max Discharge400 cfs
Year Completed1970 (56 years old)
Year Modified2003
NID IDLA00525

Safety Information

Low Hazard

No probable loss of human life and low economic/environmental losses expected.

Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?

Emergency Action Plan: No
Last Inspection: May 18, 2021
State Regulated: Yes
Regulatory Agency: LA DOTD

Ownership

Linda Taylor

Private

Nearby Dams

Frequently Asked Questions

What is the hazard classification of Betty Taylor Dam?

Betty Taylor Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.

Who owns and operates Betty Taylor Dam?

Betty Taylor Dam is owned by Linda Taylor (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.

When was Betty Taylor Dam built?

Betty Taylor Dam was completed in 1970, making it 56 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.

What is the primary purpose of Betty Taylor Dam?

Betty Taylor Dam serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.

How tall is Betty Taylor Dam?

Betty Taylor Dam has a dam height of 18 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.

When was Betty Taylor Dam last inspected?

Betty Taylor Dam was last inspected on May 18, 2021. Inspection dates indicate when a formal review occurred, not the results of that inspection.

Data from the National Inventory of Dams (NID) maintained by the US Army Corps of Engineers. Dam conditions may have changed since the last update. This site is not affiliated with USACE. Do not use for emergency planning — contact your local dam safety program.