Berg Dam
Key Takeaway
Berg Dam is classified as low hazard in Iowa. It was completed in 1967 and is 59 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 29 ft (taller than 42.8% in IA) |
| Dam Length | 302 ft |
| Dam Type | Earth |
| Max Storage | 45 acre-ft |
| Normal Storage | 26 acre-ft |
| Surface Area | 3 acres |
| Drainage Area | 0 sq mi |
| Max Discharge | 0 cfs |
| Year Completed | 1967 (59 years old) |
| NID ID | IA00565 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Leander Berg
Private
Nearby Dams
Schulte Farm Dam
Keokuk, IA
Low Hazard 28 ftSieren Dam
Keokuk, IA
Low Hazard 29 ftGriener Dam
Keokuk, IA
Low Hazard 39 ftGriener Dam
Keokuk, IA
Low Hazard 30 ftHahn/Linnenkamp Dam
Keokuk, IA
Low Hazard 29 ftSieren Dam
Keokuk, IA
Low Hazard 23 ftTierney Dam
Keokuk, IA
Significant Hazard 14 ftFlynn/Sheetz Dam
Washington, IA
Low Hazard 28 ftFrequently Asked Questions
What is the hazard classification of Berg Dam?
Berg Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Berg Dam?
Berg Dam is owned by Leander Berg (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Berg Dam built?
Berg Dam was completed in 1967, making it 59 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Berg Dam?
Berg Dam serves the following purposes: Fire Protection, Stock, Or Small Fish Pond, Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Berg Dam?
Berg Dam has a dam height of 29 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.