Bell Lake Dam
Key Takeaway
Bell Lake Dam is classified as high hazard in Missouri. It was completed in 1951 and is 75 years old. Its primary use is recreation. High hazard means loss of life is likely if the dam fails — it does not indicate the dam's current condition. Learn more.
Physical Details
| Dam Height | 34 ft (taller than 82.3% in MO) |
| Dam Type | Earth |
| Max Storage | 109 acre-ft |
| Normal Storage | 76 acre-ft |
| Surface Area | 6 acres |
| Drainage Area | 106 sq mi |
| Year Completed | 1951 (75 years old) |
| NID ID | MO10606 |
Safety Information
Loss of human life is likely if the dam fails.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
NATHANIEL WINER
Private
Nearby Dams
Mononame 162
Clay, MO
Low Hazard 20 ftHelvey Park Dam
Clay, MO
Low Hazard 36 ftHanks Lake Dam
Platte, MO
Low Hazard 31 ftSmithville Dam
Clay, MO
High HazardH & H Lake Dam
Clay, MO
High Hazard 25 ftSampson Lake Dam
Platte, MO
Low Hazard 30 ftStevens Lake Dam
Platte, MO
Low Hazard 25 ftBill Brown Dam
Clay, MO
Low Hazard 28 ftFrequently Asked Questions
What is the hazard classification of Bell Lake Dam?
Bell Lake Dam is classified as High Hazard. Loss of human life is likely if the dam fails. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Bell Lake Dam?
Bell Lake Dam is owned by NATHANIEL WINER (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Bell Lake Dam built?
Bell Lake Dam was completed in 1951, making it 75 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Bell Lake Dam?
Bell Lake Dam serves the following purposes: Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Bell Lake Dam?
Bell Lake Dam has a dam height of 34 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Bell Lake Dam last inspected?
Bell Lake Dam was last inspected on September 26, 1978. Inspection dates indicate when a formal review occurred, not the results of that inspection.