Belews Creek Saddle Dike #3 Dam
Key Takeaway
Belews Creek Saddle Dike #3 Dam is classified as high hazard in North Carolina. It was completed in 1971 and is 55 years old. Its primary use is other. High hazard means loss of life is likely if the dam fails — it does not indicate the dam's current condition. Learn more.
Physical Details
| Dam Length | 830 ft |
| Dam Type | Earth |
| Max Storage | 263.5K acre-ft |
| Normal Storage | 185.1K acre-ft |
| Surface Area | 3,863 acres |
| Drainage Area | 44,378 sq mi |
| Max Discharge | 26,577 cfs |
| Year Completed | 1971 (55 years old) |
| NID ID | NC05940 |
Safety Information
Loss of human life is likely if the dam fails.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Duke Energy Corporation
Public Utility
Nearby Dams
Belews Creek Saddle Dike #4 Dam
Rockingham, NC
High HazardBelews Creek Saddle Dike #2 Dam
Stokes, NC
High HazardBelews Creek Saddle Dike #1 Dam
Stokes, NC
High HazardBelews Lake Dam
Rockingham, NC
High HazardPine Hall Brick Dam
Stokes, NC
Low HazardDillon Dam
Rockingham, NC
Low HazardBelews Creek Holding Basin Dam
Stokes, NC
High HazardWilliams Lake Dam
Rockingham, NC
Low HazardFrequently Asked Questions
What is the hazard classification of Belews Creek Saddle Dike #3 Dam?
Belews Creek Saddle Dike #3 Dam is classified as High Hazard. Loss of human life is likely if the dam fails. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Belews Creek Saddle Dike #3 Dam?
Belews Creek Saddle Dike #3 Dam is owned by Duke Energy Corporation (Public Utility). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Belews Creek Saddle Dike #3 Dam built?
Belews Creek Saddle Dike #3 Dam was completed in 1971, making it 55 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Belews Creek Saddle Dike #3 Dam?
Belews Creek Saddle Dike #3 Dam serves the following purposes: Other. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
When was Belews Creek Saddle Dike #3 Dam last inspected?
Belews Creek Saddle Dike #3 Dam was last inspected on June 10, 2021. Inspection dates indicate when a formal review occurred, not the results of that inspection.