Beaver Creek 2
Key Takeaway
Beaver Creek 2 is classified as low hazard in Wisconsin. It was completed in 1934 and is 92 years old. Its primary use is irrigation.
Physical Details
| Dam Height | 9 ft (taller than 12% in WI) |
| Dam Length | 445 ft |
| Dam Type | Gravity |
| Max Storage | 130 acre-ft |
| Normal Storage | 80 acre-ft |
| Surface Area | 14 acres |
| Drainage Area | 5 sq mi |
| Max Discharge | 1,400 cfs |
| Year Completed | 1934 (92 years old) |
| NID ID | WI00565 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Wisconsin Department of Natural Resources
State Government
Nearby Dams
Beaver Creek 3
Juneau, WI
Low Hazard 11 ftNecedah Wildlife Refuge 33
Juneau, WI
Low Hazard 7 ftBeaver Creek 4
Juneau, WI
Low Hazard 9 ftPool Thirty Three
Juneau, WI
Significant Hazard 7 ftLittle Yellow 20
Juneau, WI
Low Hazard 8 ftLittle Yellow 9
Juneau, WI
Low Hazard 9 ftNecedah Wildlife Refuge 33
Juneau, WI
Low Hazard 7 ftBeaver Creek 9
Juneau, WI
Low Hazard 9 ftFrequently Asked Questions
What is the hazard classification of Beaver Creek 2?
Beaver Creek 2 is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Beaver Creek 2?
Beaver Creek 2 is owned by Wisconsin Department of Natural Resources (State Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Beaver Creek 2 built?
Beaver Creek 2 was completed in 1934, making it 92 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Beaver Creek 2?
Beaver Creek 2 serves the following purposes: Irrigation, Recreation, Water Supply. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Beaver Creek 2?
Beaver Creek 2 has a dam height of 9 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Beaver Creek 2 last inspected?
Beaver Creek 2 was last inspected on September 12, 2013. Inspection dates indicate when a formal review occurred, not the results of that inspection.