Beaver Brook (Joel Flowage)
Key Takeaway
Beaver Brook (Joel Flowage) is classified as low hazard in Wisconsin. It was completed in 1931 and is 95 years old. Its primary use is other.
Physical Details
| Dam Height | 9 ft (taller than 12% in WI) |
| Dam Length | 2,000 ft |
| Dam Type | Gravity |
| Max Storage | 370 acre-ft |
| Normal Storage | 170 acre-ft |
| Surface Area | 65 acres |
| Drainage Area | 22 sq mi |
| Max Discharge | 120 cfs |
| Year Completed | 1931 (95 years old) |
| NID ID | WI00285 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Wisconsin Department of Natural Resources
State Government
Nearby Dams
Frequently Asked Questions
What is the hazard classification of Beaver Brook (Joel Flowage)?
Beaver Brook (Joel Flowage) is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Beaver Brook (Joel Flowage)?
Beaver Brook (Joel Flowage) is owned by Wisconsin Department of Natural Resources (State Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Beaver Brook (Joel Flowage) built?
Beaver Brook (Joel Flowage) was completed in 1931, making it 95 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Beaver Brook (Joel Flowage)?
Beaver Brook (Joel Flowage) serves the following purposes: Other, Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Beaver Brook (Joel Flowage)?
Beaver Brook (Joel Flowage) has a dam height of 9 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Beaver Brook (Joel Flowage) last inspected?
Beaver Brook (Joel Flowage) was last inspected on June 17, 2003. Inspection dates indicate when a formal review occurred, not the results of that inspection.