Beane Dam
Key Takeaway
Beane Dam is classified as low hazard in Iowa. It was completed in 1973 and is 53 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 36 ft (taller than 74.2% in IA) |
| Dam Length | 410 ft |
| Dam Type | Earth |
| Max Storage | 80 acre-ft |
| Normal Storage | 59 acre-ft |
| Surface Area | 9 acres |
| Drainage Area | 0 sq mi |
| Max Discharge | 0 cfs |
| Year Completed | 1973 (53 years old) |
| NID ID | IA01029 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Ercil Beane
Private
Nearby Dams
Tim Seim Dam
Tama, IA
Low Hazard 25 ftMills Dam
Marshall, IA
Low Hazard 22 ftJudge Dam
Tama, IA
Low Hazard 38 ftHempys Lake Dam
Tama, IA
Low Hazard 32 ftHinegardner Lake Dam
Tama, IA
Low Hazard 18 ftFellowship Lake Dam
Tama, IA
Low Hazard 40 ftUnion Grove Silt Containment Dam
Tama, IA
Low Hazard 17 ftDeschamp Dam
Tama, IA
Low Hazard 26 ftFrequently Asked Questions
What is the hazard classification of Beane Dam?
Beane Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Beane Dam?
Beane Dam is owned by Ercil Beane (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Beane Dam built?
Beane Dam was completed in 1973, making it 53 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Beane Dam?
Beane Dam serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Beane Dam?
Beane Dam has a dam height of 36 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.