Bayless Taylor Dam

VIRGIN CREEK· Bollinger, Missouri· Built 1974· Earth· 21 ft tall
Low Hazard Fish And Wildlife Pond Recreation Private

Key Takeaway

Bayless Taylor Dam is classified as low hazard in Missouri. It was completed in 1974 and is 52 years old. Its primary use is fish and wildlife pond.

Physical Details

Dam Height 21 ft (taller than 13.3% in MO)
Dam Length500 ft
Dam TypeEarth
Max Storage160 acre-ft
Normal Storage103 acre-ft
Surface Area9 acres
Drainage Area333 sq mi
Max Discharge288 cfs
Year Completed1974 (52 years old)
NID IDMO31091

Safety Information

Low Hazard

No probable loss of human life and low economic/environmental losses expected.

Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?

Emergency Action Plan: No
Last Inspection: May 17, 1979
State Regulated: No

Ownership

BAYLESS TAYLOR

Private

Nearby Dams

Frequently Asked Questions

What is the hazard classification of Bayless Taylor Dam?

Bayless Taylor Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.

Who owns and operates Bayless Taylor Dam?

Bayless Taylor Dam is owned by BAYLESS TAYLOR (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.

When was Bayless Taylor Dam built?

Bayless Taylor Dam was completed in 1974, making it 52 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.

What is the primary purpose of Bayless Taylor Dam?

Bayless Taylor Dam serves the following purposes: Fish And Wildlife Pond, Recreation. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.

How tall is Bayless Taylor Dam?

Bayless Taylor Dam has a dam height of 21 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.

When was Bayless Taylor Dam last inspected?

Bayless Taylor Dam was last inspected on May 17, 1979. Inspection dates indicate when a formal review occurred, not the results of that inspection.

Data from the National Inventory of Dams (NID) maintained by the US Army Corps of Engineers. Dam conditions may have changed since the last update. This site is not affiliated with USACE. Do not use for emergency planning — contact your local dam safety program.