Barton Village

Clyde River· Orleans, Vermont· Built 1949· Masonry· 17 ft tall
Low Hazard Hydroelectric Public Utility

Key Takeaway

Barton Village is classified as low hazard in Vermont. It was completed in 1949 and is 77 years old. Its primary use is hydroelectric.

Physical Details

Dam Height 17 ft (taller than 41.8% in VT)
Dam Length77 ft
Dam TypeMasonry
Max Storage560 acre-ft
Normal Storage560 acre-ft
Surface Area187 acres
Drainage Area108 sq mi
Max Discharge762 cfs
Year Completed1949 (77 years old)
NID IDVT00187

Safety Information

Low Hazard

No probable loss of human life and low economic/environmental losses expected.

Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?

Emergency Action Plan: No
Last Inspection: May 28, 2019
State Regulated: No

Ownership

Barton Village Inc.

Public Utility

Nearby Dams

Frequently Asked Questions

What is the hazard classification of Barton Village?

Barton Village is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.

Who owns and operates Barton Village?

Barton Village is owned by Barton Village Inc. (Public Utility). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.

When was Barton Village built?

Barton Village was completed in 1949, making it 77 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.

What is the primary purpose of Barton Village?

Barton Village serves the following purposes: Hydroelectric. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.

How tall is Barton Village?

Barton Village has a dam height of 17 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.

When was Barton Village last inspected?

Barton Village was last inspected on May 28, 2019. Inspection dates indicate when a formal review occurred, not the results of that inspection.

Data from the National Inventory of Dams (NID) maintained by the US Army Corps of Engineers. Dam conditions may have changed since the last update. This site is not affiliated with USACE. Do not use for emergency planning — contact your local dam safety program.