Bakers Falls

Missisquoi River· Orleans, Vermont· Built 1925· Concrete· 14 ft tall
Low Hazard Hydroelectric Private

Key Takeaway

Bakers Falls is classified as low hazard in Vermont. It was completed in 1925 and is 101 years old. Its primary use is hydroelectric.

Physical Details

Dam Height 14 ft (taller than 29.8% in VT)
Dam Length180 ft
Dam TypeConcrete
Max Storage50 acre-ft
Normal Storage50 acre-ft
Surface Area7 acres
Drainage Area101 sq mi
Max Discharge1,550 cfs
Year Completed1925 (101 years old)
NID IDVT00188

Safety Information

Low Hazard

No probable loss of human life and low economic/environmental losses expected.

Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?

Emergency Action Plan: No
Last Inspection: May 15, 2019
State Regulated: No

Ownership

Troy Mills Hydroelectric Inc.

Private

Nearby Dams

Frequently Asked Questions

What is the hazard classification of Bakers Falls?

Bakers Falls is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.

Who owns and operates Bakers Falls?

Bakers Falls is owned by Troy Mills Hydroelectric Inc. (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.

When was Bakers Falls built?

Bakers Falls was completed in 1925, making it 101 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.

What is the primary purpose of Bakers Falls?

Bakers Falls serves the following purposes: Hydroelectric. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.

How tall is Bakers Falls?

Bakers Falls has a dam height of 14 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.

When was Bakers Falls last inspected?

Bakers Falls was last inspected on May 15, 2019. Inspection dates indicate when a formal review occurred, not the results of that inspection.

Data from the National Inventory of Dams (NID) maintained by the US Army Corps of Engineers. Dam conditions may have changed since the last update. This site is not affiliated with USACE. Do not use for emergency planning — contact your local dam safety program.