Baack Dam
Key Takeaway
Baack Dam is classified as low hazard in Iowa. It was completed in 1999 and is 27 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 27 ft (taller than 30.7% in IA) |
| Dam Length | 386 ft |
| Dam Type | Earth |
| Max Storage | 55 acre-ft |
| Normal Storage | 21 acre-ft |
| Surface Area | 4 acres |
| Drainage Area | 0 sq mi |
| Max Discharge | 0 cfs |
| Year Completed | 1999 (27 years old) |
| NID ID | IA03237 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Dan Baack
Private
Nearby Dams
Hammer Dam
Warren, IA
Low Hazard 28 ftKoethe Dam #2
Warren, IA
Low Hazard 26 ftLakewood Dredge Spoil Dam
Warren, IA
Low Hazard 30 ftLawyer Dam
Warren, IA
Low Hazard 29 ftLake Colchester Dam
Warren, IA
Significant Hazard 31 ftBaker Dam
Warren, IA
Low Hazard 26 ftMc Aninch Dam
Warren, IA
Low Hazard 33 ftBatesole Dam
Warren, IA
Low Hazard 23 ftFrequently Asked Questions
What is the hazard classification of Baack Dam?
Baack Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Baack Dam?
Baack Dam is owned by Dan Baack (Private). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Baack Dam built?
Baack Dam was completed in 1999, making it 27 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Baack Dam?
Baack Dam serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Baack Dam?
Baack Dam has a dam height of 27 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.
When was Baack Dam last inspected?
Baack Dam was last inspected on October 1, 2003. Inspection dates indicate when a formal review occurred, not the results of that inspection.