Albertson Dam
Key Takeaway
Albertson Dam is classified as low hazard in Iowa. It was completed in 2000 and is 26 years old. Its primary use is fire protection.
Physical Details
| Dam Height | 18 ft (taller than 5.6% in IA) |
| Dam Length | 495 ft |
| Dam Type | Earth |
| Max Storage | 108 acre-ft |
| Normal Storage | 21 acre-ft |
| Surface Area | 6 acres |
| Drainage Area | 0 sq mi |
| Max Discharge | 0 cfs |
| Year Completed | 2000 (26 years old) |
| NID ID | IA03877 |
Safety Information
No probable loss of human life and low economic/environmental losses expected.
Hazard potential describes downstream consequences of failure, not the dam's current condition. What does this mean?
Ownership
Milton Albertson
Local Government
Nearby Dams
Fetters Dam
Wayne, IA
Low Hazard 25 ftUpper Locust Creek Watershed Site L-33
Wayne, IA
Low Hazard 23 ftUpper Locust Creek Watershed Site L-35
Wayne, IA
Low Hazard 26 ftUpper Locust Creek Watershed Site L-25
Wayne, IA
Low Hazard 28 ftUpper Locust Creek Watershed Site L-23
Wayne, IA
Low Hazard 22 ftUpper Locust Watershed Site L-5
Wayne, IA
Low Hazard 27 ftUpper Locust Watershed Site L-30
Wayne, IA
Low Hazard 31 ftKelso Dam
Wayne, IA
Low Hazard 16 ftFrequently Asked Questions
What is the hazard classification of Albertson Dam?
Albertson Dam is classified as Low Hazard. No probable loss of human life and low economic/environmental losses expected. This classification refers to the potential downstream consequences of a failure, not the dam's current structural condition.
Who owns and operates Albertson Dam?
Albertson Dam is owned by Milton Albertson (Local Government). The owner is responsible for maintenance, inspections, and compliance with dam safety regulations.
When was Albertson Dam built?
Albertson Dam was completed in 2000, making it 26 years old. Many U.S. dams were built between the 1930s and 1970s during a period of major infrastructure investment.
What is the primary purpose of Albertson Dam?
Albertson Dam serves the following purposes: Fire Protection, Stock, Or Small Fish Pond. Many dams in the U.S. are multi-purpose, supporting flood control, water supply, recreation, and other uses.
How tall is Albertson Dam?
Albertson Dam has a dam height of 18 ft. Dam height is measured from the natural streambed at the downstream toe to the top of the dam, and may differ from the visible height.